PREVOST H3-41 Maintenance Manual page 701

7.0 Remove all masking material 30 minutes after
application.
1. Check and confirm that dew point and surface temperature are in accordance with the following
criteria, Use the following table to determine dew point.:
Surface temperature > 10°C
Surface temperature > or = to dew point + 3°C
2. Check and confirm that TECTYL temperature is between 10°C and 35°C.
thickness is 10 mils wet or 5 mils dry.
ANNEX 1
PA1621 Maintenance Manual All Series | Revised Sept 2019
SECTION 18b: X3 SERIES BODY
17