FIGURE 41: EVAPORATOR MOTOR BOLTS
• Install the complete unit on a work bench,
unfasten the fan square head set screws, the
Phillips head screws retaining cages to base
and slide out the assemblies from the
evaporator motor output shaft.
• Remove motor from double blower fan unit
base.
FIGURE 42: EVAPORATOR MOTOR ASSEMBLY
4.3.2
Installation
To reinstall the evaporator motor, reverse
"Evaporator Motor Removal" procedure.
SECTION 22: HEATING AND AIR CONDITIONING
22315
PA1621 Maintenance Manual All Series | Revised February 2019
31