Rear Fender; Engine R. H. Side Access Door Adjustment - PREVOST H3-41 Maintenance Manual

Hide thumbs Also See for H3-41:
Table of Contents

Advertisement

SECTION 18b: X3 SERIES BODY
9.4 ZONE 4
FIGURE 48: ZONE 4
9.4.1

Rear Fender

Rear fenders are hinged for maintenance on
brakes and suspension. Each rear fender panel
has two mechanical spring loaded holding
devices fixing it to the vehicle's structure. Push
the spring type rod sideways to disengage the
lock.
FIGURE 49: LEFT REAR FENDER
NOTE
Commuter type vehicles may be equipped with
a secondary lock. Pull the handle to disengage
the lock.
58
PA1621 Maintenance Manual All Series | Revised Sept 2019
9.4.2
Engine R. H. Side Access Door
Adjustment
Engine R. H. side access door may be adjusted
for proper fit. To do so, follow the steps below:
1. To adjust the position, the door must be free
to move without any restriction. For this
reason, remove pin E and strike plate C
(Figure 50).
Temporarily secure the secondary lock in the
depressed position with a cable tie so it does
not interfere with adjustments. Remove
cable tie once completed.
18627

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

H3-45H3-45 vipX3-45X3-45 vip

Table of Contents