Window Removal - PREVOST H3-41 Maintenance Manual

SECTION 18a: H3 SERIES BODY

17.2 WINDOW REMOVAL

Replacement awning window does not include a
new motor. If in working order, transfer the motor
of the replaced window to the replacement
window. If not, the motor can be bought
separately. When replacing the window, keep
the components in working order as spare parts.
1. Push the vertical latch handle downwards to
release the track and then open the window
using the horizontal latch handle.
2. Take out the screw at the lower end of the
track to let free the swiveling arm roller.
3. Unplug connector C7 & C9. Dismount the
gas spring from the window.
FIGURE 41: ELECTRIC AWNING WINDOW EXPLODED VIEW (FRAME)
48
PA1621 Maintenance Manual All Series
4. Loosen the set screws #5 (Figure 42) (rotate
the arm to get to the second set screw) and
disengage the swiveling arm from the motor
shaft extension.
5. Push the glass window out ninety degrees
(90°).
WARNING
The window may fall out.
6. The window is free and can be unhooked.
7. Reverse procedure to install a new one.
|
Revised Sept 2019
18586