Replacement - PREVOST H3-41 Maintenance Manual

CAUTION
Position the air lines and electric wires so they
will not be damaged while removing the front
axle assembly.
8. Proceed with steps a, b and c, while referring
to Section 16: ''SUSPENSION''.
a) Disconnect sway bar links from axle
brackets.
b) Remove shock absorbers.
c) Disconnect five
transversal and two longitudinal from
subframe, and two upper rods from axle.
9. Remove the bolts and nuts fixing the axle to
the left-hand and right-hand side air springs
mounting supports.
10. Using the jacks, slowly lower the axle
assembly, and carefully pull away from
underneath vehicle.
5.2

REPLACEMENT

Reverse front axle "Removal" procedure. Ensure
cleanliness of air bellows support mounting plates.
NOTE
Refer to Section 16, ''Suspension'', Section 14,
''Steering'' and to paragraph 8 ''Specifications''
at the end of this section for applicable checks.
Refer to torque tables at the beginning of this
section for tightening.
radius rods: one
PA1621 Maintenance Manual All Series
SECTION 10: FRONT I-BEAM AXLE
|
Section revised October 2018
9