Specifications - PREVOST H3-41 Maintenance Manual

SECTION 13: WHEELS, HUBS AND TIRES

16. SPECIFICATIONS

STEEL WHEELS
Wheel size .................................................................................................................................... 9.0" X 22.5"
Tire size ..................................................................................................................................... 315/80 R 22.5
ALUMINUM WHEELS
Wheel size ....................................................................................................................................... 9" X 22.5"
Tire size ..................................................................................................................................... 315/80 R 22.5
OPTIONAL FRONT & TAG AXLE ALUMINUM WHEELS (Standard on VIP vehicles)
Wheel size .................................................................................................................................. 10.5" X 22.5"
Tire size ..................................................................................................................................... 365/70 R 22.5
OPTIONAL WIDE BASE TIRE ALUMINUM WHEELS
Wheel size ..................................................................................................................................... 14" X 22.5"
Tire size ..................................................................................................................................... 455/55 R 22.5
RECOMMENDED TIRE INFLATION PRESSURE AT MAXIMUM LOAD (cold)
NOTE
Vehicle is delivered with the specific inflation pressure certification plate according to the tire selection.
For more information consult section 11 "Technical information" of the Owner's/Operator's manual
under "DOT Certification Plate".
WARNING
Special tire selection may lower maximum allowable speed limit, even below posted speed limit. For
maximum safety, check with tire manufacturer.
CAUTION
Bus shell vehicles should be weighed fully loaded and tires pressurized according to tire manufacturer's
recommendations.
WARNING
Recommended tire inflation pressures and maximum allowable loads apply to speeds up to 65 mph
(105 km/hr). Do not drive vehicle at a higher speed than 65 mph (105 km/h) or above the posted speed
limit.
30
PA1621 Maintenance Manual All Series | January 2017