SECTION 18b: X3 SERIES BODY
NOTE
Adjustment is made by moving UP or DOWN
the lock plates.
6. Open baggage compartment door and
adjust using the cylinder mounting block.
7. Door should be adjusted in reference to
neighboring doors.
8. Target is to have 5 ½" (140mm) from bus
body panel to door panel and +/- 2mm
vertically between doors.
68
PA1621 Maintenance Manual All Series | Revised Sept 2019
9. Tighten cylinder block fixing screws.
10. Door bottom edge compression can be
adjusted
by
moving
pantograph arms at this location.
in
or
out
the