INDEPENDENT FRONT SUSPENSION ADJUSTMENT
Measurement
1. Make sure that the air system pressure is at
least 90 psi.
2. Measure that the air springs clearance (two air
springs). To do so, measure the clearance
between the support found above the air spring
and the lower end of the air spring (if needed,
use a metal ruler to reach the lower end of the
air spring).
3. The clearance should be in accordance with
the value of Table 1.
4. Take the measurement where indicated on the
image preferably.
PREFERRED
POSITIONS
MEASURING TAPE
MI16-14 / Page 8 / 10
WHERE
TO
PLACE
THE
<QF7720955 rev 6>