PREVOST H3-41 Maintenance Manual page 677

Clean using tack cloth.
A)
Repeat if surface seems dusty.
Clean using anti-silicone
B)
See SAV000001 section A.
Apply primer 206 G+P.
C)
See SAV000001 section D.
SAV000001 Section D Sika Primer 206 G+P
3. Allow to dry
Mandatory 206 G+P
Before applying any other product If surface seems dusty, dust using damp cloth.
SS Body structure preparation
1.10
Clean using anti-silicone.
A)
Clean structure at least twice. Repeat is
necessary until cloth comes clean.
See SAV000001 section A.
Apply 1 ¼" protective tape along bottom
B)
structural tubing.
3.
Shake bottle to mix product
4.
Apply a thin layer
Minimum time : 10 minutes
After 2 hours: Remove dust using damp cloth (pure water)
After 8 days : Reactivate with Aktivator as per section "C"
If surface seems greasy or with finger marks, reactivate
with Aktivator.
PA1621 Maintenance Manual All Series
SECTION 18a: H3 SERIES BODY
CHIX cloth
|
Revised Sept 2019
73