Passenger Seats; Rotating Seats - PREVOST H3-41 Maintenance Manual

WARNING
Nozzle is hot.
4. Always add an extra inch of filler bead at the
beginning and at the end of repair.
5. Perform steps indicated in paragraphs 9, 10
and 11.

15. PASSENGER SEATS

The vehicle can be equipped with different seat
models and installed in a variety of seating
arrangements:
1. For coaches, standard seating arrangement
includes two card tables, which can be
folded and removed, and pivoting seats
ahead of each card table. Each pair of seats
is built on a welded steel frame fastened to
the side wall and on a track-mounted
pedestal.
2. The "V.I.P." seat model is an optional seat.
"V.I.P." seats are mounted on one row of
paired seats built on a common frame on
one side of the vehicle, and a row of single
seats on the other side of the vehicle with an
off-center aisle. Each "V.I.P." seat has its
own set of armrests.
Each seat has an easily removable bottom
cushion. Upholstery is clipped on the cushion
frame for cleaning or replacement. To remove
the fabric, simply unclip from the frame. The
standard seats have three armrests. The aisle
and center armrests can be folded up and down
manually, while the window armrest is fixed.

15.1 ROTATING SEATS

1. Loosen completely the threaded-stud knob
under the seat on the aisle side (Figure 27).
FIGURE 27: LOOSEN THE KNOB
2. Pull the seat toward the aisle to unlock the
rotation (Figure 28).
FIGURE 28: PULL TO UNLOCK THE ROTATION
3. Rotate the seats until it stops (Figure 29, A)
and push back toward the window to lock
rotation (Figure 29, B).
PA1621 Maintenance Manual All Series
SECTION 18a: H3 SERIES BODY
|
Revised Sept 2019
41