PREVOST H3-41 Maintenance Manual page 981

Select the function (e.g. contrast) by pressing
the key SELECT repeatedly. The setting within
the function can be modified with the keys UP
and DOWN.
For calling up the menu USER press the key
MENU once again. The menu USER appears.
Select the function (e.g. SELECTION) by
pressing the key SELECT
necessary. The setting within the function can be
modified with the keys UP and DOWN.
USER
ENGLISH/GERMAN
LANGUE ENG
(ENG/DEUT)
NOR 4:3, picture format 4:3
WIDE, picture format 16:9
SCREEN WIDE
FULL, picture format 16:9
middle enlarge
TITLE: CAMERA TITLE
DISPLAY ON/OFF
TITLE ON
TIME: TIME DISPLAY
TIME ON
ON/OFF
For calling up the menu TIME press the key
MENU once again. The menu TIME appears.
Select the function (e.g. DATE) by pressing the
key SELECT repeatedly as necessary. The
setting within the function can be modified with
the keys UP and DOWN.
TIME
Hour-Month adjustable by UP
TIME 08:25
BUTTON
Minute/Date adjustable by
DATE MAY01
DOWN BUTTON
Year adjustable by UP/DOWN
YEAR 2005
BUTTON
For calling up the menu INSTALL press the key
MENU once again. The menu TIME appears.
Select the function (e.g. SELECTION) by
pressing the key SELECT
necessary. The setting within the function can be
modified with the keys UP and DOWN.
repeatedly as
SETTINGS
OPERATION
repeatedly as
SECTION 23A: ACCESSORIES - H3 SERIES
INSTALL
Selection
REAR CAM1
(CAM1
triggered by rear gear.
Selection
CAM1 MIR
mirrored picture for camera 1.
Selection
CAM2 NOR
mirrored picture for camera 2.
NOTE 1
The distance mark will appear on the picture of
camera which set as MIR (mirrored).
NOTE 2
Engaging the reverse gear, only distance mark
will appear on the mirrored camera picture
without any OSD. At the moment, no keys are
available except UP/DOWN key for moving
distance bar.
BACK-UP CAMERA MODULE (Power box)
The connection line consists of 6 branch lines as
below:
RED Voltage supply 12-volt to 24-
volt (max. 32-volt)
BLACK/BROWN Earth cable
WHITE Control wire for switching on
the dimmer function (night
operation)
YELLOW Control wire for switching on
the side camera. The
connection is to be made at
the INDICATOR
ORANGE Control wire for switching on
the reversing camera. The
connection is to be made at
the reversing light
PA1621 Maintenance Manual All Series | Jan 2020
POSSIBLE SETTINGS:
of priority camera
or CAM2) which
of real picture
of real picture
15
is
or
or