1.
STANDARD TORQUE SPECIFICATION TABLES
Refer to Section 00 general information for Standard Torque Specifications.
FIGURE 1: PROPELLER SHAFT ASSEMBLY (typical)
2.
PROPELLER SHAFT
2.1
DESCRIPTION
The propeller shaft transmits power from the
transmission to the differential. Refer to paragraph
"6. SPECIFICATIONS" at the end of this section for
propeller shaft length. The propeller shaft is Dana
Spicer Life Series SPL250 type with tubular shafts.
It is provided with two heavy-duty universal joints
(
).
FIGURE 1
SECTION 09: PROPELLER SHAFT
The propeller shaft has a half round end yoke at
each end. The slip yoke is connected to the
differential by a half round end yoke with two needle
bearings.
The other extremity (tube yoke assembly) is
connected to the transmission by a half round end
yoke
with
transmission) or a flange yoke and companion
flange
with
Transmission).
PA1621 Maintenance Manual All Series | Revised May 2018
two
needle
bearings
two
needle
bearings
(Allison
(I-Shift
3