SECTION 23A: ACCESSORIES - H3 SERIES
Slide the cassette into the compartment to get
the rear rollers backward the rail front stopper.
FIGURE 48: SLIDE CASSETTE OVER STOPPERS
Drop down the rear side of the cassette until it
gets contact with the rail and make sure the
back rollers are aligned with the V-rail.
Remove jacks (2) on the rear side.
FIGURE 49: JACK REMOVAL ON REAR SIDE
Reinstall the fasteners on the dismounted jacks.
36
PA1621 Maintenance Manual All Series | Jan 2020
Keep sliding the cassette inside the compart-
ment to get the front rollers backward of the
stoppers.
FIGURE 50: SLIDE THE CASSETTE INSIDE THE
COMPARTMENT
Drop down the front side of the cassette until it
gets contact with the rail and make sure the
rollers are aligned with the V-rail.
Remove the jacks (2) on the front side of the
cassette.
FIGURE 51: JACKS REMOVAL
Reinstall the fasteners on the dismounted jacks.