PREVOST H3-41 Maintenance Manual page 731

 Apply anti-silicone inside right angle.
 Apply Sika 205 inside right angle.
 Apply 1/16 x1/4 double face self-adhesive
tape onto gutter.
 Peel the back from double face self-
adhesive tape.
 Apply Sika 252 inside right angle.
 If applicable, remove plastic film at the
bottom of driver's window.
 Remove
driver's window.
 Clean bottom of driver's window using
window cleaner.
 Apply Sika Aktivator at the bottom of
driver's window.
 Install gutter under driver's window then
compress in order to fix double face self-
adhesive tape.
 Install 3 clamps and allow curing for 4
hours.
PA1621 Maintenance Manual All Series | Revised Sept 2019
SECTION 18b: X3 SERIES BODY
excess of Sika underneath
47