Installation; Wireless Microphone - PREVOST H3-41 Maintenance Manual

SECTION 23A: ACCESSORIES - H3 SERIES
3. Disconnect wiring.
2.7.2

Installation

1. Reconnect wiring.
2. Align mounting flange with holes and install
screws.
3. Remove spacer block mounting screws.
4. Insert spacer block and install mounting
screws.
5. Place the battery master switch in the ''ON''
position.
2.8 HANDHELD PRIORITY MICROPHONE
FIGURE 12: HANDHELD PRIORITY MICROPHONE
2.9

WIRELESS MICROPHONE

The wireless microphone, receiver and charging
cradle are custom designed units that allow for
wireless communication from anywhere on the
coach. The unit consists of a receiver mounted
in the parcel area directly behind the driver, and
a rechargeable hand-held microphone and
charging unit. Instructions for proper use of the
microphone are included in the ''REI Operating
Manual'' which is provided in the technical
publications box delivered with the vehicle.
12
PA1621 Maintenance Manual All Series | Jan 2020
FIGURE 13: WIRELESS MICROPHONE
FIGURE 14: WIRELESS MIC RECEIVER
23216
FIGURE 15: MIC DEVICES
Handheld mic always airs to channel A and belt
pack mic always pairs to channel B.
To pair microphone to receiver:
 Press ACT button for appropriate channel.
ACT indicator on receiver display will
blink to show the receiver is searching
for the device to be paired.
 Turn device on and face the IR ports to-
wards the display on the receiver.
 When device has paired, there will be bars
across the top edge of the receiver dis-
play for
the appropriate channel.