PREVOST H3-41 Maintenance Manual page 855

While the vehicle is being towed, connect an auxiliary air supply from the tow truck to the quick connect
fitting identified AIR SUPPLY to supply air for all systems (brakes, suspension, accessories) through the
air dryer (Figure24, Figure25).
FIGURE 24
2.1.3 Drive Axle Flange Shaft Removal
1. Apply the parking brake.
2. Remove the stud nuts and the washers (with
Meritor drive axle) or cap screws (with ZF drive
axle) from the flange shaft.
NOTE: there is oil behind the flange shaft
which comes out during disassembly
Writer:
FL
FIGURE 25 : FRONT TOWING AIR SUPPLY
ACCESS PANEL QUICK CONNECT FITTINGS
FIGURE 26 : ZF A-132 AXLE
MI18-18
Page 11 / 30
<QF7720955 rev 7>