PREVOST H3-41 Maintenance Manual page 545

25 Torque rod, nut
26 Torque rod, stud
27 Sway bar bushing collar (front suspension)
28 Shock absorber mounting stud nut
29 Shock absorber mounting stud
30 Shock absorber lower mounting pin nut
31 Torque rod lever bolt (M20-2.5)
32 Steering arm bolt (M22-2.5)
* Tighten nut to specified torque, then advance to next aligning cotter pin slot and install a new cotter pin
NOTE
Apply corrosion-protective compound on exposed threads.
1.3 REAR SUSPENSION
PA1621 Maintenance Manual All Series | Section revised October 2018
SECTION 16 : SUSPENSION
2 158-193 lb-ft (214-262 Nm)
2 90-110 lb-ft (122-149 Nm)
8 80-100 lb-ft (108-136 Nm)
1 99-121 lb-ft (134-164 Nm)
1 350-400 lb-ft (475-542 Nm)
1 60-75 lb-ft (81-102 Nm)
2 520-575 lb-ft (705-780 Nm)
2 642-708 lb-ft (870-960 Nm)
.
16206:
ZF drive axle
9