Fuel Filler Door - PREVOST H3-41 Maintenance Manual

Hide thumbs Also See for H3-41:
Table of Contents

Advertisement

2. Loosen the screws fixing the hinge to hinge
attachment or hinge to door assembly.
Loosening the screws allows the condenser
door assembly to be shifted "LEFT or
RIGHT" and "UP or DOWN" or "IN and
OUT".
3. Adjust condenser door assembly position at
the hinge.
4. Respect the required gap between exterior
finishing panels.
5. Tighten the screws.
6. Check that the door swings freely and closes
properly. It may be necessary to adjust the
door latch to get proper fit and operation.
9.5.7

Fuel Filler Door

1. Open the fuel filler door.
2. Loosen the screws holding the panel to
hinge assembly.
3. Adjust the fuel filler door position according
to
distance
required
finishing panels.
4. Tighten the nuts.
5. Check that the door swings freely and closes
properly.
FIGURE 82: FUEL FILLER DOOR
between
exterior
03046
PA1621 Maintenance Manual All Series | Revised Sept 2019
SECTION 18b: X3 SERIES BODY
81

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

H3-45H3-45 vipX3-45X3-45 vip

Table of Contents