PREVOST H3-41 Maintenance Manual page 871

7. Place the fork's shorter finger outboard for
better clearance (see Figure 62).
8. Raise the rear of the vehicle.
9. Install a jack stand under the stinger arm for
support and safety purposes and then lower
the stinger arm so it rests on the jack stand
(Figure 63). The tow cans or blocks can be
removed from under the drive axle wheels.
Writer:
FL
FIGURE 62 : PROPER LOCATION WHEN LIFTING THE SIDE
MEMBERS – VEHICLE EQUIPPED WITH REAR TOW EYES
FIGURE 63
MI18-18
Page 27 / 30
<QF7720955 rev 7>