Tpms Sensors Installation - PREVOST H3-41 Maintenance Manual

SECTION 13: WHEELS, HUBS AND TIRES
Super Single tire
Valve 650013
Install the valve in place.
Torque 106-133 lb-in
(12-15 Nm)

14.1 TPMS SENSORS INSTALLATION

Check proper valve positioning before
installing sensor onto valve (risk of
damaging the sensor or air leaks).
Pressure sensor #560032.
Remove bar code with supplied removable
tie-rap.
Make sure never to mix the bar code
between the wheels. (bar code is linked to
sensor)
Positioning the sensor on the wheel. Ensure
that the sensor is well pressed onto the
surface.
Torx screw T-20
TORQUE: 35 lb-in (4 Nm)
IMPORTANT
-Put blue Loctite 243 to the threads.
-Use the screw only once.
-Replacement screw #651084.
Install bar code and tie it up using wheel
holes. Use supplied removable tie-rap.
26
PA1621 Maintenance Manual All Series | January 2017
#Prevost 650013