Toshiba H1 Series Data Book page 521

3.19.3.3 Basic Operation
The following diagram shows the basic timings of the waveforms generated by the
LCDC and adjustable elements. The adjustable elements for each signal include enable
time, phase, and delay time.
The signals used and their connections and settings vary with the LCD driver type
(STN/TFT) and specifications to be used.
Signal Name
LVSYNC signal
(Enable width control)
(Phase control)
LHSYNC signal
LLOAD signal
LGOEn signal
(Enable width control)
(Phase control)
(Delay control)
LFR signal (FREDGE=0)
(Frame divide control)
(Line)
(Dot)
LFR signal (FREDGE=1)
DLS=0 (Line inversion)
LLOAD signal
LLOAD signal details
LCP0 signal
(Only at valid data output)
(Always output)
LD23-LD0 signal
LDINV signal
(Enable width control)
(Phase control)
(Enable width control)
(Delay control)
(Line divide)
(Line divide)
(Valid data output)
(Phase control)
92CZ26A-518
Frame period (Refresh rate)
(Phase control)
(Dot divide)
(Dot divide)
TMP92CZ26A