Toshiba H1 Series Data Book page 592

3.22 Melody / Alarm generator (MLD)
TMP92CZ26A contains melody function and alarm function, both of which are output from
the MLDALM pin. Five kind of fixed cycles interrupt is generate by using 15bit counter, which
is used for alarm generator.
Features are as follows.
1) Melody generator
The Melody function generates signals of any frequency (4Hz- 5461Hz) based on low-speed
clock (32.768 KHz) and outputs the signals from the MLDALM pin.
By connecting a loud speaker outside, Melody tone can easily sound.
2) Alarm generator
The Alarm function generates eight kinds of alarm waveform having a modulation frequency
(4096Hz) determined by the low-speed clock (32.768 KHz). And this waveform is able to invert
by setting a value to a register.
By connecting a loud speaker outside, Alarm tone can easily sound.
Five kinds of fixed cycles (1Hz, 2Hz, 64Hz, 512Hz, 8192Hz) INTERRUPT are generated by
using a counter that is used for alarm generator.
This section is constituted as follows.
3.22.1 Block diagram
3.22.2 Control registers
3.22.3 Operational Description
3.22.3.1 Melody generator
3.22.3.2 Alarm generator
92CZ26A-589
TMP92CZ26A