ST STM32G4 Series Reference Manual page 1903

RM0440
43.2 FDCAN main features
• Conform with CAN protocol version 2.0 part A, B and ISO 11898-1: 2015, -4
•
CAN FD with maximum 64 data bytes supported
• CAN error logging
•
AUTOSAR and J1939 support
• Improved acceptance filtering
•
Two Receive FIFOs of three payloads each (up to 64 Bytes per payload)
•
Separate signaling on reception of High priority messages
•
Configurable Transmit FIFO / queue of three payload (up to 64 Bytes per payload)
•
Transmit Event FIFO
•
Programmable loop-back test mode
•
Maskable module interrupts
•
Two clock domains: APB bus interface and CAN core kernel clock
•
Power down support
FD controller area network (FDCAN)
RM0440 Rev 1 1903/2083
1965