Configuring The H.239 Protocol; Configuring Bfcp (Binary Floor Control Dual Protocol); Configuring Mix-Sending - Yealink MeetingEye 600 Administrator's Manual

Configuring the H.239 Protocol

•

Configuring BFCP (Binary Floor Control dual Protocol)

•
Configuring the H.239 Protocol
H.239 protocol is used when sharing content with the far site in H.323 calls. You can configure the H.239
protocol for the StarLeaf platform or H.323 account.
Procedure
1. On your web user interface, go to Account > VC Platform > Platform Type > StarLeaf or Account >
H.323.
2. Configure and save the following settings:
Parameter
H.239
Configuring BFCP (Binary Floor Control dual Protocol)
BFCP is used when sharing content with the remote in SIP calls. You can configure the BFCP protocol for
Zoom, Pexip, BlueJeans, EasyMeet or a custom third-party platform, SIP account, and SIP IP call.
Procedure
1. On your web user interface, go to Account > VC Platform > Platform Type > Zoom/Pexip/BlueJeans/
EasyMeet /Videxio/Custom or go to Account > SIP Account/SIP IP Call.
2. Configure and save the following settings:
Parameter
BFCP
Related tasks

Configuring Mix-Sending

Configuring Mix-Sending
During a call, the remote party may not support dual-stream protocol or fail to negotiate with the dual-
stream protocol. Therefore, you need enable this feature, so that multiple video streams (the local video +
the local content) can be synthesized to one video stream and sent to the remote.
Procedure
1. On your web user interface, go to Setting > Video & Audio > Presentation.
2. Configure and save the following settings:
Description
Enable or disable the H.239
protocol.
Default: On.
Description
Enable or disable the BFCP.
Default: On.
This feature is not applicable
to Yealink StarLeaf Cloud
platform.
| Configuring Content Sharing | 178
Configuration Method
Web user interface
Configuration Method
Web user interface