Yealink MeetingEye 600 Administrator's Manual page 66

Parameter
DHCP
Static IP
IP Address
IPv6 prefix((0~128)/
IP prefix
Gateway
Description
Enable or disable the system
to obtain network settings
from the DHCP server.
Note: the default value is On.
If you change this parameter,
the system will reboot to
make the change take effect.
Enable or disable the system
to manually configured IPv6
network settings.
Note: the default value is Off.
If you change this parameter,
the system will reboot to
make the change take effect.
Configure the IPv6 address
assigned to the system.
Note: It is configurable only
when the network type is
selected as Static IP.
If you change this parameter,
the system will reboot to
make the change take effect.
Configure the IPv6 prefix.
Note: It is configurable only
when the network type is
selected as Static IP.
If you change this parameter,
the system will reboot to
make the change take effect.
Configure the IPv6 default
gateway.
Note: It is configurable only
when the network type is
selected as Static IP.
If you change this parameter,
the system will reboot to
make the change take effect.
| Configuring Network Settings | 66
Configuration Method
Web user interface
Endpoint
CTP20
Web user interface
Web user interface
Endpoint
CTP20
Web user interface
Endpoint
CTP20
Web user interface
Endpoint
CTP20