Parameter
CA Certificates
Device Certificates
Enabling/Disabling the PC Port
The PC port of the VP59 is activated by default and can be used to provide computers with the network. If
you do not want the VP59 to provide network to the computer, you can disable this feature.
Procedure
1. On your web user interface, go to Network > PC Port > PC Port Active.
2. Configure and save the following settings:
Parameter
PC Port Active
Related information
Network Speed and Duplex Mode
Description
Upload the CA certificates.
Note: upload the CA
certificates when the 802.1x
authentication mode is
configured as EAP-TLS,
PEAP-MSCHAPv2, or EAP-
TTLS/EAP-MSCHAPv2.
If you change this parameter,
the system will reboot to
make the change take effect.
Upload the device
certificates.
Note: Configure the
access URL of the server
certificate when the 802.1x
authentication mode is
configured as EAP-TLS.
If you change this parameter,
the system will reboot to
make the change take effect.
Description
Enable or disable the VP59
to provide the connected
computer with the network.
•
Disabled
•
Auto Negotiation
Note: the default value is
Auto Negotiation.
If you change this parameter,
the system will reboot to
make the change take effect.
| Configuring Network Settings | 81
Configuration Method
Web user interface
Web user interface
Configuration Method
Web user interface