Media Audio Input - Yealink MeetingEye 600 Administrator's Manual

Parameter
Line AEC
Audio Line In
Note:
If VCS Phone is set as the audio output device manually or automatically, the audio input device
must be VCS Phone or VCS Phone+Wireless Microphone.
Related information
Audio Input Type

Media Audio Input

When the Endpoint is connected to both a microphone and other media audio inputs (such as connected
to a computer to play audio), you need to configure the type of media audio input, so that the mix input can
Description
Enable or disable echo cancellation
for line input device.
On- eliminate the echo to the line
•
input devices. If you select an
acoustic device (for example: a
microphone) to be the line input,
you can enable this configuration.
• Off- do not eliminate the echo
to the line input devices. If you
select a non-acoustic device (for
example: a mobile phone) to be
the line input, you can disable this
configuration.
Note: the default value is Off.
This configuration is available only
when Audio Input is set to Line Input/
USB to Line input. If you change this
parameter, the system will reboot to
make the change take effect.
Configure the volume of line input
device.
Note:
• Valid value: Integer from -50 to
50dB.
• The default value 0 means to use
the default sending volume. The
value you set is based on the
default value.
• This configuration is available
only when Audio Input is set to
Line Input/USB to Line input. If
you change this parameter, the
system will reboot to make the
change take effect.
• It is not applicable to MeetingEye
400/VP59.
| Configuring the Audio Settings | 148
Configuration Method
Web user interface
Web user interface