Configuring Dual-Stream Protocol - Yealink VC880 Administrator's Manual

Note:
If the far site does not support the dual-stream protocol, you can select the Mix Sending feature to mix the
video and content, and then send them to the far site in one stream.
•

Configuring Dual-Stream Protocol

• Configuring Mix-Sending
• Configuring the Parameters of the Shared Content
Configuring Dual-Stream Protocol
The dual-stream protocol allows the video and PC content to be transmitted to the far site simultaneously, thus
meeting the requirements of different conference scenarios, such as training or medical consultation. Based on this
protocol, the participants can share contents while having a video call.
The Yealink video conferencing system supports the standard H.239 protocol and BFCP (Binary Floor Control
Protocol).
• Configuring the H.239 protocol
• Configuring BFCP (Binary Floor Control Protocol)
Configuring the H.239 protocol
H.239 protocol is used when sharing content with the far site in H.323 calls.
Procedure
1. Do one of the following:
On your web user interface, go to Account > VC Platform > Video Conference Platform > Platform
•
Type > StarLeaf.
• On your web user interface, go to Account > H.323.
2. Configure and save the following settings:
Parameter
H.239
Configuring BFCP (Binary Floor Control Protocol)
BFCP is used when sharing content with the remote in SIP calls.
Procedure
1. Do one of the following:
• On your web user interface, go to Account > VC Platform > Video Conference Platform > Platform
Type > Zoom/Pexip/BlueJeans/EasyMeet / Videxio/Custom.
On your web user interface, go to Account > SIP Account/SIP IP Call.
•
2. Configure and save the following settings:
Description
Enables or disables the H.239
protocol.
Default: On.
| Configuring System Settings | 130
Configuration Method
Web user interface