Configuring the Mode of WDR-Auto
WDR-auto mode is not applicable to MeetingEye 600/MeetingEye 400/VC200.
Procedure
1. Do one of the following:
•
On your web user interface, go to Setting > Camera > Exposure.
•
go to More > Setting > Camera > Exposure.
•
On your CTP20, tap
2. Select WDR-Auto from the Exposure/Exposure mode drop-down menu.
3. Configure and save the following settings:
Parameter
Exposure
Compensation
Configuring WDR-Manual
WDR-Manual mode is not applicable to MeetingEye 600/MeetingEye 400/VC200.
Procedure
1. Do one of the following:
On your web user interface, go to Setting > Camera > Exposure.
•
go to More > Setting > Camera > Exposure.
•
•
On your CTP20, tap
2. Select WDR-Manual from the Exposure/Exposure mode drop-down menu.
3. Configure and save the following settings:
Parameter
Exposure
Compensation
> Setting > Basic > Camera > Exposure.
Description
Configure the value of exposure
compensation.
The exposure compensation is
used to compensate the camera
effectively when the camera is
shooting in a backlit environment. If
the environment light is dark, you can
increase the compensation value.
Note: the valid value is -6 to 6. The
default value is 0.
> Setting > Basic > Camera > Exposure.
Description
Configure the value of exposure
compensation.
The exposure compensation is used
to compensate the camera effectively
when the camera is shooting in a
backlit environment. If the environment
light is dark, you can increase the
compensation value.
Note: the valid value is -6 to 6. The
default value is 0.
| Configuring Camera Settings | 194
Configuration Method
Web user interface
Endpoint
CTP20
Configuration Method
Web user interface
Endpoint
CTP20