Configuring Static Nat - Yealink MeetingEye 600 Quick Start Manual

Troubleshooting
Connectivity Testing
After installation and deployment, you can test the endpoint by dialing the Yealink Demo Room
(117.28.251.50 or 117.28.234.45
administrator to check the network.

Configuring Static NAT

If you do not use Cloud platform and deploy your endpoint
mapping on the firewall
cannot hear sound when you call Yealink Demo or other endpoints.
firewall or gateway in your environment does not support the ALG feature. In this situation, please take
the following actions so that the static NAT feature on the endpoint can solve this problem.
To configure static NAT via the remote control:
1. Select More->Network->Wired Network
2. Select Automatic from the pull-down list of Type, the endpoint will obtain public IP address
automatically.
3. If the endpoint does not obtain a public IP address automatically, select Manual Settings from the
pull-down list of Type, and then enter the public IP address in the Public IP Address field.
4. Save the change.
). If you can't dial out successfully, please contact your IT
or gateway, but you find that local endpoint appears black screen and you
(Default Admin
in an Intranet, you have configured port
The most likely reason is that the
Password:0000)->NAT/Firewall.
6