Yealink MeetingEye 600 Administrator's Manual page 244

On your web user interface, go to Account > SIP Account/SIP IP Call.
•
2. Configure and save the following settings:
Parameter
SRTP
During the SIP call, call parties can see the encrypted icon
H.235
H.235 system provides the identity authentication, the data encryption, and the integration. H.235 encrypts
the RTP during H.323 calls to avoid interception and eavesdropping.
The H.235 is supported by the systems. The parties participating in the call must enable H.235 feature
simultaneously. When this feature is enabled on both sites, the encryption type used in the session is
negotiated between the systems. The StarLeaf platform also supports H.235 encryption. After logging in to
the StarLeaf platform, you can use H.235 encryption.
Rules of H.235 security in H.323 calls are described as below:
Remote\Local
Compulsory
Optional
Disabled
Configuring H.235 Encryption
•
Configuring H.235 Encryption
When you log in to the StarLeaf platform or use an H.323 account, you can configure the H.235 encryption
feature for the H.323 protocol.
Procedure
1. On your web user interface, go to Account > VC Platform > Platform Type > StarLeaf or go to
Account > H.323.
2. Configure and save the following settings:
Description
Specify the SRTP type.
The supported types are as
follows:
Disabled—the SRTP
•
feature is disabled in the
SIP call.
• Optional—the call parties
in a SIP call will negotiate
whether to use the SRTP
feature or not.
• Compulsory—the
SRTP feature is enabled
compulsorily in the SIP
call.
Default: Disabled.
Compulsory
H.235 Call
H.235 Call
Fail to establish a call
| Configuring the Security Features | 244
Configuration Method
Web user interface
displayed in their screens.
Optional
H.235 Call
H.235 Call
RTP Call
Disabled
Fail to establish a call
RTP Call
RTP Call