Camera Settings
You can set multiple camera parameters to make the MeetingBar A20 have better framing in the different
meeting room environments.
•
Controlling Camera Position
•
Configuring the Exposure Settings
•
Configuring the White Balance Setting
•
Adjusting Display Image of the Camera
•
Enabling Auto-framing for Camera
•
Enabling Voice-tracking for Camera
•
Adjusting Hangup Mode and Camera Pan Direction
•
Resetting the Camera
Controlling Camera Position
Procedure
1. Go to More > Settings > Device Settings > Control.
2. Do one of the following:
•
Select
/
•
Select the arrow keys to pan/tilt the camera.
•
Select Reset to reset the position for camera.
Configuring the Exposure Settings
Procedure
1. Go to More > Settings > Device Settings > Exposure Settings.
2. Select the desired mode from the Exposure Mode field.
If you select Auto Exposure:
•
Select the desired value from the Exposure Compensation, Flicker, Gain Limit, Wide Dynamic
Range, Metering field respectively.
If you select Manual Exposure:
•
Select the desired value from the Gain Limit, Wide Dynamic Range, Shutter field respectively.
If you select Shutter Priority:
•
Select the desired value from the Exposure Compensation, Gain Limit, Wide Dynamic Range,
Metering, Shutter field respectively.
•
If you select Brightness Priority:
Select the desired value from the Flicker, Wide Dynamic Range, Metering, Brightness field
respectively.
to control camera zoom out/in.
| Camera Settings | 20