Yealink MeetingEye 600 Administrator's Manual page 68

Note: If you connect the codec to the wireless network via CTP20, make sure that CTP20 is wired
to the codec.
Connecting to the Wireless Network
•
Connecting to a Hidden Wireless Network
•
Connecting to the Wireless Network
You can manually connect your phone to a wireless network.
Procedure
1. Do one of the following:
• On your VCS:
For MeetingEye 600/MeetingEye 400, go to More > Setting > Network > Wi-Fi.
For VC880/VC800/VC500/PVT980/PVT950, go to More > Setting > Advanced > Wi-Fi.
For VC200, go to More > Network > Wi-Fi.
For VP59, tap Setting > Network & ConnectionWi-Fi.
•
On your CTP20, tap
2. Enable Wi-Fi.
3. If you already enabled wireless AP, select OK to turn it off.
The system will automatically search for available wireless networks in your area.
4. Select the desired wireless network (SSID) and connect to it.
If the network is secure, enter its password in the Password field, and tap Join to Network.
Connecting to a Hidden Wireless Network
Some wireless networks do not broadcast their SSIDs, which makes them unavailable to find. In order to
connect to one of those networks, you need to connect to one of them manually.
Procedure
1. Do one of the following:
• On your VCS:
For MeetingEye 600/MeetingEye 400, go to More > Setting > Network > Wi-Fi.
For VC880/VC800/VC500/PVT980/PVT950, go to More > Setting > Advanced > Wi-Fi.
For VC200, go to More > Network > Wi-Fi.
For VP59, tap Setting > Network & Connection > Wi-Fi.
•
On your CTP20, tap
2. Enable Wi-Fi.
3. If you already enabled wireless AP, select OK to turn it off.
The system will automatically search for available wireless networks in your area.
4. Select Other.
5. Enter the name of the wireless network.
6. Select the desired value from the Security Mode drop-down menu.
7. Configure the corresponding parameters.
8. Select Join to Network.
> Setting > Network > Host Network > Network > Wi-Fi.
> Setting > Network > Host Network > Network > Wi-Fi.
| Configuring Network Settings | 68