Yealink MeetingEye 600 Administrator's Manual page 239

Default Certificates: The system has 36 built-in trusted certificates.
•
Custom Certificates: You can upload up to 10 trusted certificates with the size no more than 5M to the
•
system. The format of the CA certificates must be .pem, .cer, .crt and .der.
Procedure
1. On your web user interface, go to Security > Trusted Certs.
2. Configure and save the following settings:
Parameter
Only Accept Trusted
Certificates
Common Name Validation
Description
Enable or disable the system
only trusting the server
certificates in the trusted
certificates list.
Note: the default value is On.
If it is disabled, the system
can connect to the server no
matter whether the certificate
send by the system is valid or
not.
If it is enabled, the system
will authenticate the server
certificate based on the
trusted certificates list. Only
when the authentication
succeeds, will the system
trust the server.
If you change this parameter,
the system will reboot to
make the change take effect.
Enable or disable the system
to mandatorily validate
the CommonName or
SubjectAltName of the server
certificate sent by the server.
This security verification rules
RFC 2818.
are compliant with
Note: the default value is Off.
If you change this parameter,
the system will reboot to
make the change take effect.
| Configuring the Security Features | 239
Configuration Method
Web user interface
Web user interface