Configuring Usb Storage; Configuring Local Storage - Yealink MeetingEye 600 Administrator's Manual

The selected input method appears in the Enabled column.
3. Repeat step 2 to add more input methods to the Enabled column.
4.
To remove a input method from the Enabled column, select the desired input method and then click
5.
To adjust the display order of the enabled input methods, select the desired input method, and click
or .
The input method shown at the top has the highest priority.

Configuring USB Storage

If you have high requirement for data security, you can disable the USB storage. After disabling the feature,
you cannot use the USB flash drive to store recorded videos, screenshots or captured packets.
Procedure
1. On your web user interface, go to Setting > Video & Audio > USB Config.
2. Configure and save the following settings:
Parameter
USB Enable

Configuring Local Storage

MeetingEye 600/MeetingEye 400/VC200/VP59 allows you to store the images and recorded videos to local
storage as well as the USB storage.
About this task
Note: The priority of local storage is lower than USB storage. When users disable USB storage,
the captured screenshot and recorded files are saved on local storage automatically.
Procedure
1. On your web user interface, go to Setting > Video & Audio > USB Config.
2. Configure and save the following settings:
Description
Enable or disable the USB
feature.
Note: the default value is On.
If you change this parameter,
the system will reboot to
make the change take effect.
| Basic Settings | 136
Configuration Method
Web user interface
.