Setting The Language; Configuring Key Tone - Yealink MeetingEye 600 Administrator's Manual

For MeetingEye 600/MeetingEye 400, go to More > Setting > Basic > Basic.
For VC880/VC800/VC500/VC200/PVT980/PVT950, go to More > Setting > Basic.
For VP59, tap SettingBasic.
•
On your CTP20, tap
2. Configure and save the following settings:
Parameter
Site Name

Setting the Language

You can specify a language displayed in the monitor and the web user interface respectively. The CP960
conference phone will detect and use the same language as the monitor.
Procedure
1. Do one of the following:
On your web user interface, click Language at the top of the web page.
•
• On your VCS,
For MeetingEye 600/MeetingEye 400, go to More > Setting > Basic > Basic > Language.
For VC880/VC800/VC500/VC200/PVT980/PVT950, go toMore > Setting > Basic > Language.
For VP59, tap Setting > Basic > Language.
•
On your CTP20, tap
2. Select the desired language.
3. Save the change.

Configuring Key Tone

You can enable the key tone feature. When you press any key on the remote control or tap the onscreen
dial pad on the CP960 conference phone, the system will produce a sound. For VP59, when you press any
key on the phone or tap any key on the Dial page, the device will produce key tone.
Procedure
1. Do one of the following:
• On your web user interface, go to Setting > General > General Information.
• On your VCS,
For MeetingEye 600/MeetingEye 400, go to More > Setting > Basic > Basic.
For VC880/VC800/VC500/VC200/PVT980/PVT950, go to More > Setting > Basic.
For VP59, tap Setting > Basic.
•
On your CTP20, tap
> Setting > Basic > General.
Description
Configure the site name of
the system.
Note: you can enter 64
characters at most.
> Setting > Basic > General > Language.
> Setting > Basic > General.
| Basic Settings | 117
Configuration Method
Web user interface
Endpoint
CTP20