Parameter
Color Temperature
Adjusting the Exposure
To display the high-quality video image, you can adjust the camera Exposure. This feature is not applicable
to VP59.
Configuring Auto Exposure Mode
•
Configuring Manual Exposure Mode
•
Configuring the Mode of Shutter Priority
•
Configuring Aperture Priority
•
Configuring the Mode of Brightness Priority
•
Configuring the Mode of WDR-Auto
•
Configuring WDR-Manual
•
Configuring Auto Exposure Mode
The auto-exposure feature can achieve the desired brightness level (or so-called target brightness level) in
different lighting conditions and scenes, so that the videos or images captured are neither too dark nor too
bright.
Procedure
1. Do one of the following:
On your web user interface, go to Setting > Camera > Exposure.
•
•
On your VCS:
For MeetingEye 600/MeetingEye 400, go to More > Setting > Basic > Camera > Exposure.
For VC880/VC800/VC500/PVT980/PVT950, go to More > Setting > Camera > Exposure.
For VC200, go to More > Setting > Video & Audio > Exposure.
•
On your CTP20, tap
2. Select Auto/Auto Exposure from the Exposure/Exposure mode drop-down menu.
3. Configure and save the following settings:
Description
Configure the value of the
color temperature.
Note: the value is from 2800K
to 6800K. The default value
is the color temperature
tested in the your current
environment. You can set
this parameter only when
the white balance mode is
configured to Manual.
> Setting > Basic > Camera > Exposure.
| Configuring Camera Settings | 186
Configuration Method
Web user interface
Endpoint