About this task
SNMP feature is not applicable to VP59.
Procedure
1. On your web user interface, go to Network > Advanced > SNMP.
2. Configure and save the following settings:
Parameter
Active/STUN Active
Port
Trusted Address
Configuring Account Settings
This chapter provides information on how to configure account settings.
Setting SIP Account/SIP IP Call
•
Setting H. 323 Account/H.323 IP Call
•
Configuring the PSTN account
•
Configuring the Video Conference Platform Account
•
Switching Platform Quickly
•
Logging out of the Video Conference Platform
•
Setting SIP Account/SIP IP Call
Yealink video conferencing system supports Session Initiation Protocol (SIP). If your server supports SIP,
you can make a voice/video call using the SIP account or IP address.
Configuring SIP Accounts
•
Configuring SIP IP Call
•
Description
Enable or disable SNMP feature on
the system.
Note: the default value is Off.
If you change this parameter, the
system will reboot to make the
change take effect.
Configure the SNMP port.
Note: the value can be any integer
from 1 to 65535. The default value
is 161.
If you change this parameter, the
system will reboot to make the
change take effect.
Configure the IP address or domain
name of the SNMP server.
Note: If you change this parameter,
the system will reboot to make the
change take effect.
| Configuring Account Settings | 88
Configuration Method
Web user interface
Web user interface
Web user interface