Configuring The Monitor Resolution - Yealink MeetingEye 600 Administrator's Manual

Parameter
Frame
Resolution
Note:
If both parties do not use H.265 codec, and choose to use WDR exposure mode and 60fps, the
call will switch to auto exposure mode automatically. For more information, refer to
Exposure

Configuring the Monitor Resolution

You can specify the resolution for the monitor.
Procedure
1. Do one of the following:
• On your web user interface, go to Setting > Video & Audio > Output Resolution.
For MeetingEye 600/MeetingEye 400, go toSetting > Display > Resolution.
• On your CP960 conference phone, go to Setting > Display > Resolution.
2. Configure and save the following settings:
Description
Configure the maximum
frame rate of the video.
•
•
•
•
Default: 30fps.
Configure the maximum
resolution of the video.
•
•
•
•
Default: 1080P.
.
5 fps
15 fps
30 fps
60fps—this option
appears only when you
enable 60fps.
1080P
720P
360P
4K—this option appears
only when you Enable
4K. It is only applicable
to MeetingEye 600/
MeetingEye 400.
| Configuring Video Settings | 173
Configuration Method
Web user interface
Web user interface
Adjusting the