Configuring Sip Accounts - Yealink MeetingEye 600 Administrator's Manual

Configuring SIP Accounts

Yealink video conferencing system supports Session Initiation Protocol (SIP). If your server supports SIP,
you can configure a SIP account for your device, and other users can call you by dialing your SIP account.
Procedure
1. Do one of the following:
On your web user interface, go to Account > SIP Account.
•
• On your VCS,
For MeetingEye 600/MeetingEye 400, go to More > Setting > Advanced > Account > SIP
Account.
For VC880/VC800/VC500/VC200/PVT980/PVT950, go to More > Setting > Advanced > SIP
account .
For VP59, tap Setting > Advanced > SIP Account.
•
On your CTP20, tap
2. Configure and save the following settings:
Parameter
Line Active/SIP Account
Username
Register Name
Password
Server Host/Server
> Setting > Advanced > Account > SIP Account.
Description
Enable or disable SIP
Accounts.
Note: the default value is
On. If it is set to disabled,
the devices cannot place
or receive calls via the SIP
protocol.
The username of this SIP
account.
Note: the default value is
blank.
The registration name of this
SIP account.
Note: the default value is
blank.
The registration password of
this SIP account.
Note: the default value is
blank.
The IP address or domain
name of the SIP server.
Note: the default value is
blank.
| Configuring Account Settings | 89
Configuration Method
Web user interface
Endpoint
CTP20
Web user interface
Endpoint
CTP20
Web user interface
Endpoint
CTP20
Web user interface
Endpoint
CTP20
Web user interface
Endpoint
CTP20