Exporting the Log Files to a USB Flash Drive
Procedure
1. On your web user interface, go to Setting > Configuration > Local Log.
2. In the Enable Local Log field, select On.
3. In the USB Auto Exporting Syslog field, select On.
4. Click Confirm.
A folder named yealink.debug appears in your USB flash drive, which includes the log files.
Note:
The severity level of the exported Module Log will not be greater than the local Log Level. For
example: If you set Local Log Level to 3 and set Talk log Level to 6, the exported Talk log Level
will still be 3 in your exported local log. If you set Local Log Level to 5 and set Talk log Level to 4,
the exported Talk log Level will be 4 in your exported local log.
Exporting the Log Files to a Syslog Server
Procedure
1. On your web user interface, go to Setting > Configuration > Syslog.
2. Configure and save the following settings:
Parameter
Enable Syslog
Syslog Server
Port
Syslog Transport Type
Description
Select On to enable the
system to upload log
messages to the syslog
server.
Default: On.
Configure the IP address
or the domain name of the
syslog server.
Configure the port of the
syslog server.
Configure the transport
protocol that the device uses
when exporting log messages
to the syslog server.
•
UDP
•
TCP
•
TLS
Default: UDP.
| System Maintenance | 260
Configuration Method
Web user interface
Web user interface
Web user interface
Web user interface