Placing A Call; Placing A Call By Entering A Number - Yealink MeetingEye 600 Administrator's Manual

Select the desired history record and then press the right navigation key to select Video Call or
Voice Call.
For VP59, select the desired call type and tap the desired entry.
• On your CP960 conference phone, tap History.
Tap beside the desired history record and then tap Video Call or Voice Call.
On your CTP20, tap Dial > History.
•
If you register a Yealink Cloud account or YMS account, go to New Meeting > History.
Select the desired call type and call record, and dial it out.

Placing a Call

You can use your system just like a regular phone to place calls in numerous ways.

Placing a Call by Entering a Number

•
Editing Numbers Before Calling
•
Placing a Call by Entering a Number
You can place a call by using the web user interface, the remote control or the CP960 conference phone.
About this task
You can place a call to following account types:
• IP address (for example: 192.168.1.15)
• H. 323 account
• SIP account
• Cloud account
• PSTN account
• SIP URI (for example: 2210@sip.com)
Procedure
Do one of the following:
On your web user interface, go to Home.
•
Enter the number in the Enter Number field.
Select the desired call type and video call rate.
Click Video Call or Voice Call to place a video or voice call.
• On your VCS,
For MeetingEye 600/MeetingEye 400, go to Dial > Dial.
If you register a Yealink Cloud account or YMS account, go to New Meeting > Dial.
Go to Auto at the screen bottom and select the desired call type from the drop-down menu.
Enter the number and dial.
For VC880/VC800/VC500/VC200/PVT980/PVT950, go to Dial.
Select the desired call type from the drop-down menu of Call Type.
| Placing a Call | 233