Parameter
Date Format/Date
Setting the Time Reminder
The system displays a clock on the hour during a call. You can disable it if you do not want to pay attention
to time. This feature is not applicable to VP59.
Procedure
1. On your web user interface, go to Setting > Date&Time.
2. Configure and save the following settings:
Parameter
Time Reminder
Description
Configure the date format.
The supported formats are as
below:
•
WWW MMM DD
•
DD-MMM-YY
•
YYYY-MM-DD
•
DD/MM/YYYY
•
MM/DD/YY
•
DD MMM YYYY
•
WWW DD MMM
Default: YYYY-MM-DD.
Note:
WWW" represents the
abbreviation of the week;
"DD" represents a two-digit
day;
"MMM" represents the first
three letters of the month;
"YYYY" represents a four-digit
year, and "YY" represents the
last two digits of the year.
Description
Enable or disable the system
to display a clock on the hour
during a call.
Default: On.
| Basic Settings | 125
Configuration Method
Web user interface
Endpoint
CTP20
Configuration Method
Web user interface