Configuring The View Switching - Yealink MeetingEye 600 Administrator's Manual

Parameter
Voice Hold Active Duration

Configuring the View Switching

The view switching allows the video images on the monitor change automatically. It is initiated when the
number of participants exceeds the number of windows in the selected video layout.
• Average Mode: Up to 9 video images can be displayed in the Equal N×N layout. When the number of
participants exceeds 9, all participants' video images will be switched automatically. The video image of
the active speaker is indicated by an orange border. If you share content, the PC content is fixed at the
top-left corner and will not be switched automatically.
• 1+N Mode: Up to 8 video images can be displayed in the Speaker View layout and the 1+N layout.
When the number of participants exceeds 8, all participants' video images (except the active speaker)
will be switched automatically. If you share content, the PC content is given prominence in the largest
pane. The active speaker is fixed at the bottom-left corner, and other video images will be switched
automatically.
Note:
The view switching is only applicable to VC880/VC800/PVT980/PVT950 system with a multipoint
license. It is not applicable MeetingEye 600/MeetingEye 400/VC500/VC200/VP59.
Configuring the Average Mode
•
Configuring 1+N Mode
•
Configuring the Average Mode
In Equal N×N layout, when the number of participants exceeds 9, all participants' video images will be
switched automatically. You can configure the switching mode.
Procedure
1. On your web user interface, go to Setting > Built-in MCU Setting > Video Layout > Equal N×N
Mode.
2. Configure and save the following settings:
Parameter
View Switching Interval
Description
Configure the voice activation
interval.
Note: the default value is 1
second.
If the voice duration of a
speaker is greater than 1
second, the video image of
this speaker is displayed in
largest pane.
Description
Configure the view switching
interval.
Note: the default value is 30
seconds.
The video images will be
switched automatically every
30 seconds.
| Configuring Video Settings | 166
Configuration Method
Web user interface
Configuration Method
Web user interface