Configuring the Exposure Settings
Procedure
1. Go to More > Settings > Device Settings > Exposure Settings.
2. Select the desired mode from the Exposure Mode field.
For MeetingBar A20:
•
If you select Auto Exposure:
Select the desired value from the Exposure Compensation, Flicker, Gain Limit, Wide Dynamic
Range, Metering field respectively.
•
If you select Manual Exposure:
Select the desired value from the Gain Limit, Wide Dynamic Range, Shutter field respectively.
•
If you select Shutter Priority:
Select the desired value from the Exposure Compensation, Gain Limit, Wide Dynamic Range,
Metering, Shutter field respectively.
If you select Brightness Priority:
•
Select the desired value from the Flicker, Wide Dynamic Range, Metering, Brightness field
respectively.
For MeetingBar A30:
•
If you select Auto Exposure:
Select the desired value from the Flicker field respectively.
•
If you select Manual Exposure:
Select the desired value from the Shutter, Brightness field respectively.
•
If you select Shutter Priority:
Select the desired value from the Shutter field respectively.
•
If you select Brightness Priority:
Select the desired value from the Brightness field respectively.
Configuring the White Balance Setting
Procedure
1. Go to More > Settings > Device Settings > White Balance Setting.
| Camera Settings | 25