Enabling People Counting; Adjusting Camera Angle And Focus - Yealink MeetingEye 600 Administrator's Manual

Enabling People Counting

Through face detection, MeetingEye 600/MeetingEye 400 can count up to 30 participants. When the
conference ends, you can view the maximum number of participants, the conference type, the conference
start and end time on the web user interface. You can export the conference record to your PC.
Procedure
1. On your web user interface, go to Setting > Advanced Features > People Counting.
2. Configure and save the following settings:
Parameter
Enable People Counting
Save Quantity(strip)
Tip: When the call ends, click Data Output in the Conference Record field to export the
conference record to your PC.

Adjusting Camera Angle and Focus

You can pan, tilt and zoom your own camera. This feature is not applicable to VP59.
Procedure
1. Do one of the following:
•
On your web user interface, go to Home > Yourself >
• On your VCS, select the local video.
For MeetingEye 600/MeetingEye 400, go to More > Camera Control.
On your CP960 conference phone, tap Camera.
•
Description
Enable or disable the people
counting feature.
• On
• Off
Default: Disabled.
Configure the number of
conference records displayed
on the web user interface.
When you reach the limit
you set, the newly added
conference record will cover
the oldest record.
• 50
• 100
• 200
• 500
• 1000
Note: this configuration
appears only when you
enable People Counting. The
default value is 50.
.
| Configuring Camera Settings | 184
Configuration Method
Web user interface
Web user interface