Setting The Screen Saver Wait Time; Customizing The Local Interface For The System; Hide The Ip Address On The Status Bar - Yealink MeetingEye 600 Administrator's Manual

Setting the Screen Saver Wait Time

The screen saver automatically starts when the system has been idle for a period of time you specified.
You can configure the waiting time before the monitor starts the screen saver.
Procedure
1. Do one of the following:
• On your web user interface, go to Setting > General > General Information.
• On your VCS,
For MeetingEye 600/MeetingEye 400, go to More > Setting > Basic > Basic > Screensaver.
For VC880/VC800/VC500/VC200/PVT980/PVT950, go to More > Setting > Basic > Screensaver.
For VP59, tap Setting > Basic > Screensaver.
•
On your CTP20, tap
2. Configure and save the following settings:
Parameter
Screen Saver Wait Time

Customizing the Local Interface for the System

You can configure the time before the system starts screen saver, and customize the screen to show or
hide some information.

Hide the IP Address on the Status Bar

•
Hiding the Time and the Date on the Status Bar
•
Hiding the User Interface in Idle Screen
•
Showing or Hiding Icons in a Call
•
Hide the IP Address on the Status Bar
Procedure
1. On your web user interface, go to Setting > General > General Information.
2. Configure and save the following settings:
> Setting > Basic > General > Screensaver.
Description
Configure the inactive time
(minutes) before the system
starts the screen saver.
Default: 1 minute.
| Basic Settings | 129
Configuration Method
Web user interface
Endpoint
CTP20