Configuring Continuous Auto Focus; Setting The Camera Presets - Yealink MeetingEye 600 Administrator's Manual

Parameter
Camera Pan
Direction

Configuring Continuous Auto Focus

If you want to make the camera focus on the moving object automatically, you can enable this feature. If
you want a fixed focal length for presentation, for example, the class, you can disable this feature. It is not
available to MeetingEye 400/VC200/VP59.
Procedure
1. Do one of the following:
• On your web user interface, go to Setting > Camera > Focus.
• On your VCS:
For MeetingEye 600, go to More > Setting > Basic > Camera.
For VC880/VC800/VC500/PVT980/PVT950, go to More > Setting > Camera.
•
On your CTP20, tap
2. Configure and save the following settings:
Parameter
Continuous Auto Focus

Setting the Camera Presets

Presets are the pre-saved settings of both the angle and the focal length for the camera. The camera
presets can help you quickly point a camera at pre-defined locations. The camera presets can remain in
effect until you change them.
Procedure
1.
On your web user interface, go to Home > Yourself >
Description
Configure the pan direction of the
camera.
• Normal
• Reversed
If you set the Camera Pan Direction
as reversed, the camera pan
direction will be reversed when
pressing the left and right navigation
keys on the remote control. In this
case, you can set the camera pan
direction to Reversed.
Default: Normal.
> Setting > Basic > Camera.
Description
Enable or disable continuous
auto focus.
Default: On.
| Configuring Camera Settings | 198
Configuration Method
Web user interface
Endpoint
CTP20
Configuration Method
Web user interface
Endpoint
CTP20
.