Adding Local Contacts And Conference Contacts - Yealink MeetingEye 600 Administrator's Manual

Deleting Local Contacts
•

Adding Local Contacts and Conference Contacts

A conference contact consists of one or more local contacts. You can establish a conference quickly by
calling the conference contact. It is not applicable to MeetingEye 600/MeetingEye 400/VC500/VC200/
VP59.
Adding a Local Contact
•
Adding Conference Contacts
•
Adding a Local Contact
You can add 500 local contacts to your system at most.
Procedure
1. Do one of the following:
• On your web user interface, go to Directory > Local > New Contact.
If you import the multipoint license to the device, on your web user interface, go to Directory > Local
Directory > New Contact > Local.
• On your VCS,
For VC880/VC800/VC500/VC200/PVT980/PVT950, go to Dial > Directory > Local > New Contact.
For VP59, tap Dial >
2. Configure and save the following settings:
Parameter
Name
Number
Add New Number
Bandwidth
.
Description
Configure the contact name.
Configure the contact
number.
You can add up to 3 numbers
for the local contact.
Select the desired bandwidth.
The default value is Auto,
which means the system
will select the appropriate
bandwidth automatically.
Note: When you call a local
contact, the call rate that
applies (video call rate or
bandwidth) is the rate with
the lower value. For more
information, refer to
the Video Call Rate
| Managing the Directory | 221
Configuration Method
Web user interface
Endpoint
CTP20
Web user interface
Endpoint
CTP20
Endpoint
CTP20
Web user interface
Endpoint
CTP20
Specifying
.