System Integrated With Control Systems; Connection Methods Of Control Systems; Connection Settings For Control Systems - Yealink MeetingEye 600 Administrator's Manual

System Integrated with Control Systems

Yealink video conferencing system provides API for third-party control system to integrate with. Therefore,
third-party control system can control Yealink video conferencing system via API. This feature is not
applicable to VP59.

Connection Methods of Control Systems

•

Connection Settings for Control Systems

•
Connection Methods of Control Systems
You can connect Yealink video conferencing system to the control system via LAN connection or Serial
connection. Select one of the following:
• LAN Connection: Make sure the Yealink video conferencing system and the control system are in the
same network segment. If you use this mode to control the system, TCP protocol is recommended. To
establish a connection, the control system needs to know the IP address and TCP port of the Yealink
video conferencing system.
• Serial Connection: The USB port on the Yealink video conferencing system can be connected to the
serial port on the control system through a USB to RS-232 cable.
For more information, refer to
Introduction for Yealink Video Conferencing
Connection Settings for Control Systems
You need to finish following settings before you connect the video conferencing system to the control
system.
Procedure
1. On your web user interface, go to Security > Security Control.
2. Configure and save the following settings:
Parameter
Current Control TCP Port
Control Security Enabled
Yealink VC Deployment and User Manual for Control Systems
System.
Description
Control TCP port (read-only).
Default: 6024.
Enable or disable an
authentication password
when the control system
tries to connect to the video
conferencing system.
Default: On.
If you change this parameter,
the system will reboot to
make the change take effect.
| Configuring the Security Features | 247
API Commands
and
Configuration Method
Web user interface
Web user interface